Other Products...
 New: devWing Foam 2
 New: devFoam 2
 New: devSim Cnc Foam
 devFus Foam 2
 devCnc Foam
 devWing Foam
 Prices and Purchasing
 Customer Support
 Usb key
 New: Forum!


DevWing Foam:  Set cutting order and Foam Block size


In the third step of the Cutting Project you will specify the cutting order of the Blocks, the Foam block size and the placement of each block inside the Foam. If you selected multiple Blocks they will stacked and cut starting from the Upper one: 
You can view the 3D simulation of the cut of all blocks, to verify if all the cutting job works the way you like:


You can view the 3D simulation of the Side Shaping cut of all blocks. The side shaping cut is a separate cutting job to cut at the right size and shape the root/tip sides of each block. A correct angle will also be applied to the sides, taking care of the specified dihedral values


Back to devWing Foam main page
Home  |  Forum  |  Contact   
Copyright 2006/2022 - All rights reserved - P.IVA n.00860190255 info@devcad.com